I took the printer settings from the configuration file of the official E3D NANO program. In fact, the built-in profiles do not differ much from each other, only in layer thickness and speeds. Manual settings in the program do not work very well.
I needed these parameters in order to configure another slicer PrusaSlicer (configuring PrusaSlicer for E3D Nano).
The size of the print build surface (x:y:z) - 90:110:110
Gcode flavor - Marlin
Filament diameter - 1.75
Quality:
• Layer height: Custom - 0.2 | Fast - 0.2 | Standard - 0.2 | Optimal - 0.1
• Shell thickness: Custom - 1.2 | Fast - 0.8 | Standard - 1.2 | Optimal - 1.2
• Initial layer thickness: Custom - 0.3 | Fast - 0.3 | Standard - 0.3 | Optimal - 0.3
Speed:
• Print speed: Custom - 30 | Fast - 30 | Standard - 20 | Optimal - 15
• Travel speed: 50
• Bottom layer speed: 10
• Infill speed: Custom - 30 | Fast - 30 | Standard - 30 | Optimal - 20
• Top/Bottom speed: Custom - 30 | Fast - 30 | Standard - 30 | Optimal - 20
• Outer shell speed: Custom - 20 | Fast - 20 | Standard - 20 | Optimal - 15
• Inner shell speed: Custom - 30 | Fast - 30 | Standard - 30 | Optimal - 20
Infill:
• Top thickness: Custom - 6 | Fast - 4 | Standard - 6 | Optimal - 12
• Bottom thickness: Custom - 6 | Fast - 4 | Standard - 6 | Optimal - 12
• Fill Density: Custom - 15 | Fast - 0 | Standard - 10 | Optimal - 15
Support:
• Support type: Touching
• Platform adhesion: Raft
• Angle: Custom - 60 | Fast - 60 | Standard - 60 | Optimal - 30
• Amount: Custom - 15 | Fast - 0 | Standard - 15 | Optimal - 15
• XY distance: 0.7
• Z distance: 0.1
Temperature:
• Nozzle temperature: 180
• Hotbed temperature: 0
Brim:
• Brim line count: 20
Retraction:
• Retraction enable: True
• Retraction combing: All
• Speed: 50
• Distance: 4
• Minimal travel: 1.5
• Minimal extrusion: 0.02
• Z hop: 0.5
Raft:
• Margin: 5
• Line spacing: 3
• Base thickness: 0.3
• Base linewidth: 2
• Interface thickness: 0.27
• Interface linewidth: 0.4
• Airgap all: 0
• First Layer airgap: 0.45
• Surface layers: 2
• Surface thickness: 0.27
• Surface linewidth: 0.4
Other:
These are parameters that cannot be changed in the program interface.
• Filament diameter: 1.75
• Filament flow: 100
• Layer 0 width factor: 100
• Cool min layer time: 0
• Fan enabled: True
• Fan full height: 0.2
• Fan speed: 100
• Fan speed max: 100
• Cool min feedrate: 10
• Cool head lift: False
• Fill overlap: Custom - 10 | Fast - 5 | Standard - 5 | Optimal - 5
• Perimeter before infill: True
• Skirt line count: 1
• Skirt gap: 3
• Skirt minimal length: 150
• Retraction dual amount: 16.5